Handheld Veteterinary Use Pulse Oximeter with Bluetooth Function

• Classification: Imaging Diagnostic Equipment
• Type: Oximeter
• Certification: FDA
• Name: Veteterinary Oximeter
• Transport Package: Carton
• Trademark: SUNNYMED
• Model NO.: SY-C014
• Origin: China
• Production Capacity: 300 Sets/Month

Product Description

SY-C014 Handheld Veteterinary Use Pulse Oximeter with Bluetooth Function

Functions

PLETH	The monitor can display PLETH waveform
Intelligent parameter monitoring screen	The monitor automatically selects the parameter measurements to display according to the probes connected to the monitor.
Audio and visual alarm	The speaker sounds the alarm and the parameter's measurement will become in red to flash on the screen. Also the same when sensor-off.
Prompting	Icons of battery capacity, pulse sound switch and alarm sound switch.
Power saving	The monitor will automatic shut down to save power. The time is settable.
Trend	Storage/Review trend data up to 3888 groups, data save time being set freely
Data storage	The saved data will never be lost even if the monitor is powered off.
Communication	Transmitting the patient's trend to a PC for display, observation, saving and printing via USB or Bluetooth wireless

Electrical specifications

Working Voltage	D.C. 3.7V/3000mAH
AC power adaptor
Input	AC 100 V~240V, 50/60Hz, 5VA
Output	D.C. 5V
Internal battery
Type	D.C. 3.7V/3000mAH Li-ion rechargeable battery
Run Time	15-hour continuous operation with a new, fully charged battery (environment temperature is 25ºC)
Recharge time	8 hours

Parameters:

Three Parameters:SPO2,TEMP and Pulse Rate

Waveforms:

Waveform: SPO2 waveform-PLETH

 

Applications:

The oximeter could be applied in the hospital's operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.

 

Standard Packing List:

Oximeter main unit 1unit

Adult finger SpO2 sensor 1pc

Skin surface skin TEMP probe 1pc

USB communication cable 1pc

BlueTooth Radio

VSDV/Guardian/BuleTooth Software disk 1 pc

The operator's manual 1pc

Selectable Accessory:

Pediatric finger/Neonatal Wrap SpO2 sensor

 

 

Specifications:

1. General

Monitoring Parameters: SpO2,PR,PLETH,Pulse strength,TEMP

Signal sockets:SpO2 socket,TEMP socket,USB socket(for charge battery and transmit data)

2. Display screen            

Type: 240 × 320 dot matrix color TFT LCD screen

Display area: 43mm×58mm

3. Functions

PLETH: The monitor can display PLETH waveform

Intelligent parameter monitoring screen: The monitor automatically selects the parameter measurements to display according to the probes connected to the monitor.

Audio and visual alarm: The speaker sounds the alarm and the parameter's measurement will become in red to flash 

on the screen. Also the same when sensor-off.

Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch.

Power saving: The monitor will automatic shut down to save power. The time is settable. 

Trend: Storage/Review trend data up to 3888 groups, data save time being set freely

Data storage: The saved data will never be lost even if the monitor is powered off.

Communication: Transmitting the patient's trend to a PC for display, observation, saving and printing via USB or Bluetooth wireless 

4. Electrical specifications

Working Voltage: D.C. 3.7V/3000mAH

AC power adaptor      

Input: AC 100 V~240V, 50/60Hz, 5VA

 

Output: D.C. 5V

Internal battery  

Type: D.C. 3.7V/3000mAH Li-ion rechargeable battery

Run Time: 15-hour continuous operation with a new, fully charged battery (environment temperature is 25ºC)

Recharge time: 8 hours

5. Environment

Temperature

Operation: 0°C ~ 45 °C   

Transportation and storage: -20°C ~ 60 °C

Humidity

Operation: 15% - 95 %( noncondensing)   

Transportation and storage: 10% - 95 % (noncondensing)   

Altitude

Operation: 86 KPa ~106 KPa

Transportation and storage: 50KPa~106 KPa

6. Parameter Specifications

SpO2

Patient: Adult, pediatric,neonate 

Range: 0% - 100%

Resolution: 1 %

Accuracy: 70% - 99%: ±2 %

 0% - 69%: Unspecified