| Customization: | Available |
|---|---|
| Classification: | Biochemical Apparatus |
| Type: | Oximeter |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
PLETH
|
The monitor can display PLETH waveform
|
|
Intelligent parameter monitoring screen |
The monitor automatically selects the parameter measurements to display according to the probes connected to the monitor. |
|
Audio and visual alarm |
The speaker sounds the alarm and the parameter's measurement will become in red to flash on the screen. Also the same when sensor-off. |
|
Prompting
|
Icons of battery capacity, pulse sound switch and alarm sound switch. |
|
Power saving
|
The monitor will automatic shut down to save power. The time is settable. |
|
Trend
|
Storage/Review trend data up to 3888 groups, data save time being set freely |
|
Data storage
|
The saved data will never be lost even if the monitor is powered off.
|
|
Communication
|
Transmitting the patient's trend to a PC for display, observation, saving and printing via USB or Bluetooth wireless |
|
Working Voltage
|
D.C. 3.7V/3000mAH
|
|
AC power adaptor
|
|
|
Input
|
AC 100 V~240V, 50/60Hz, 5VA
|
|
Output
|
D.C. 5V
|
|
Internal battery
|
|
|
Type
|
D.C. 3.7V/3000mAH Li-ion rechargeable battery
|
|
Run Time
|
15-hour continuous operation with a new, fully charged battery (environment temperature is 25ºC) |
|
Recharge time
|
8 hours
|
Parameters:
Three Parameters:SPO2,TEMP and Pulse Rate
Waveforms:
Waveform: SPO2 waveform-PLETH
Applications:
The oximeter could be applied in the hospital's operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.
Standard Packing List:
Oximeter main unit 1unit
Adult finger SpO2 sensor 1pc
Skin surface skin TEMP probe 1pc
USB communication cable 1pc
BlueTooth Radio
VSDV/Guardian/BuleTooth Software disk 1 pc
The operator's manual 1pc
Selectable Accessory:
Pediatric finger/Neonatal Wrap SpO2 sensor
Specifications:
1. General
Monitoring Parameters: SpO2,PR,PLETH,Pulse strength,TEMP
Signal sockets:SpO2 socket,TEMP socket,USB socket(for charge battery and transmit data)
2. Display screen
Type: 240 × 320 dot matrix color TFT LCD screen
Display area: 43mm×58mm
3. Functions
PLETH: The monitor can display PLETH waveform
Intelligent parameter monitoring screen: The monitor automatically selects the parameter measurements to display according to the probes connected to the monitor.
Audio and visual alarm: The speaker sounds the alarm and the parameter's measurement will become in red to flash
on the screen. Also the same when sensor-off.
Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch.
Power saving: The monitor will automatic shut down to save power. The time is settable.
Trend: Storage/Review trend data up to 3888 groups, data save time being set freely
Data storage: The saved data will never be lost even if the monitor is powered off.
Communication: Transmitting the patient's trend to a PC for display, observation, saving and printing via USB or Bluetooth wireless
4. Electrical specifications
Working Voltage: D.C. 3.7V/3000mAH
AC power adaptor
Input: AC 100 V~240V, 50/60Hz, 5VA
Output: D.C. 5V
Internal battery
Type: D.C. 3.7V/3000mAH Li-ion rechargeable battery
Run Time: 15-hour continuous operation with a new, fully charged battery (environment temperature is 25ºC)
Recharge time: 8 hours
5. Environment
Temperature
Operation: 0°C ~ 45 °C
Transportation and storage: -20°C ~ 60 °C
Humidity
Operation: 15% - 95 %( noncondensing)
Transportation and storage: 10% - 95 % (noncondensing)
Altitude
Operation: 86 KPa ~106 KPa
Transportation and storage: 50KPa~106 KPa
6. Parameter Specifications
SpO2
Patient: Adult, pediatric,neonate
Range: 0% - 100%
Resolution: 1 %
Accuracy: 70% - 99%: ±2 %
0% - 69%: Unspecified
){kind=link}