Suppliers with verified business licenses
Audited Supplier Parameters:
| Three Parameters | SPO2,TEMP and Pulse Rate |
| Waveform | SPO2 waveform-PLETH |
Applications:
The oximeter could be applied in the hospital's operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.
Standard Packing List:
| 1 | 2Oximeter main unit | 1unit |
| 2 | Adult finger SpO2 sensor | 1pc |
| 3 | Skin surface skin TEMP probe | 1pc |
| 4 | USB communication cable | 1pc |
| 5 | BlueTooth Radio | 1 pc |
| 6 | VSDV/Guardian/BuleTooth Software disk | 1 pc |
| 7 | The operator's manual | 1 pc |
| Selectable Access | ||
| 8 | Pediatric finger/Neonatal Wrap SpO2 sensorory | |
Specifications:
1. General
| Monitoring Parameters | SpO2,PR,PLETH,Pulse strength,TEMP |
| Signal sockets | SpO2 socket,TEMP socket,USB socket(for charge battery and transmit data) |
2. Display screen
| Type | 240 × 320 dot matrix color TFT LCD screen |
| Display area | 43mm×58mm |
3. Functions
| PLETH | The monitor can display PLETH waveform |
| Intelligent parameter monitoring screen | The monitor automatically selects the parameter measurements to display according to the probes connected to the monitor. |
| Audio and visual alarm |
The speaker sounds the alarm |
| Prompting | Icons of battery capacity, pulse sound switch and alarm sound switch. |
| Power saving | The monitor will automatic shut down to save power. The time is settable. |
| Trend | Storage/Review trend data up to 3888 groups, data save time being set freely |
| Data storage | The saved data will never be lost even if the monitor is powered off. |
| Communication | Transmitting the patient's trend to a PC for display, observation, saving and printing via USB or Bluetooth wireless |
4. Electrical specifications
| Working Voltage | D.C. 3.7V/3000mAH |
| AC power adaptor | |
| Input | AC 100 V~240V, 50/60Hz, 5VA |
| Output | D.C. 5V |
| Internal battery | |
| Type | D.C. 3.7V/3000mAH Li-ion rechargeable battery |
| Run Time | 15-hour continuous operation with a new, fully charged battery (environment temperature is 25ºC) |
| Recharge time | 8 hours |
5. Environment
| Temperature | |
| Operation | 0°C ~ 45 °C |
| Transportation and storage | -20°C ~ 60 °C |
| Humidity | |
| Operation | 15% - 95 %( noncondensing) |
| Transportation and storage | 10% - 95 % (noncondensing) |
| Altitude | |
| Operation | 86 KPa ~106 KPa |
| Transportation and storage | 50KPa~106 KPa |
6. Parameter Specifications
| SpO2 | |
| Patient | Adult, pediatric,neonate |
| Range | 0% - 100% |
| Resolution | 1 % |
| Accuracy | 70% - 99%: ±2 % 0% - 69%: Unspecified |
| PR | |
| Range | 0 bpm ~250bpm |
| Resolution | 1bpm |
| Accuracy | ±2bpm |
| TEMP | |
| Channel | 1 |
| Input | Body surface thermal-sensitive resistor temperature sensor |
| Range | 0ºC~50ºC |
| Resolution | 0.1ºC |
| Accuracy | ±0.2ºC |
Pictures:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}